/*==============================================================
 File........Alaonix smart 256x160 LCD display module
             foreign font Test code for Arduino
 Purpose.....This test code for Alaonix smart 256x160 LCD display module
 Board.......Arduino nano
 Software....Arduino 1.8.13
 MCU.........Arduino ATmage328p
 Auther......Alaonix Team
 Website.....WWW.Alaonix.com
 Email.......Ala_Team@Alaonix.com
 Started.....
 Updated.....
 Note: MINIMUM CONNECTION:
       5V  <==========> Ala LCD 5V 
       GND <==========> Ala LCD GND
       Arduino Tx <===> Ala LCD Rx 
=================== Parameter =============================*/
void setup() {
  Serial.begin(19200);        // start serial port at 19200 bps
  delay(100);
  while (!Serial) {
  // wait for serial port to connect. Needed for native USB port only
  }
}
void loop() {

     Serial.println("mr");                                // Change to root direction     
     delay(150);

     Serial.println("mj,ala_font");                       // Change to font Lib direction     
     delay(150);

     Serial.println("FL,0,ala_font");                     // Load customer font to 0 buffer    
     delay(150);

     Serial.println("ac,0,0");                      // clean buffer
     delay(50);
     Serial.println("fA,0,15,60,2,1,0,#'((* -*+(&!");   
     delay(1500);
     
     Serial.println("ac,0,0");                      // clean buffer
     delay(50);
     Serial.println("fA,0,15,60,2,1,0,<=D ;>!");        
     delay(1500);
     
     Serial.println("ac,0,0");                      // clean buffer
     delay(50);
     Serial.println("fA,0,5,60,2,1,0,.#*(% $,)&*!");        
     delay(1500);
     
     Serial.println("ac,0,0");                      // clean buffer
     delay(50);
     Serial.println("fa,0,10,80,2,1,0,6:879");        
     delay(50);
     Serial.println("fA,0,140,20,2,1,0,;>!");        
     delay(1500);
     
     Serial.println("ac,0,0");                      // clean buffer
     delay(50);
     Serial.println("fA,0,25,60,2,1,0,B?DA@!");        
     delay(1500);
     
     Serial.println("ac,0,0");                      // clean buffer
     delay(50);
     Serial.println("fA,0,10,60,2,1,0,/42015 324!");        
     delay(1500);
     
     Serial.println("ac,0,0");                      // clean buffer
     delay(50);
     Serial.println("fa,12,35,30,2,1,0,Thank you for watch!");  // Write text     
     delay(50);
     Serial.println("Gb,20,236,62,2,1,0");          // Draw a line     
     delay(150);
     Serial.println("fA,25,25,65,0,1,0,Alaonix");   // Write text      
     delay(1500);
     exit(0);
}