/*==============================================================
 File........Alaonix smart 256x160 LCD display module
             Meter function 1 Test code for Arduino
 Purpose.....This test code for Alaonix smart 256x160 LCD display module
 Board.......Arduino nano
 Software....Arduino 1.8.13
 MCU.........Arduino ATmage328p
 Auther......Alaonix Team
 Website.....WWW.Alaonix.com
 Email.......AlaTeam@Alaonix.com
 Started.....
 Updated.....
 Note: MINIMUM CONNECTION:
       5V  <==========> Ala LCD 5V 
       GND <==========> Ala LCD GND
       Arduino Tx <===> Ala LCD Rx 
=================== Parameter =============================*/
void setup() {
  Serial.begin(19200);        // start serial port at 19200 bps
  delay(100);
  while (!Serial) {
  // wait for serial port to connect. Needed for native USB port only
  }
}
void loop() {

     Serial.println("mr,");                                // Change to root direction
     
     delay(150);
     Serial.println("mj,alaimage");                       // Change to image direction
     
     delay(150);
     Serial.println("Ml,8,20,1,1,meter_1");                 // Load meter scale to 1 buffer
     
     delay(150);

     Serial.println("at,1,0");                 // Load meter scale to 1 buffer
     
     delay(50);
     Serial.println("pB,128,22,100,0,1,35,1,0");                 // Load meter scale to 1 buffer
     
     delay(1000);

     Serial.println("at,1,0");                 // Load meter scale to 1 buffer
     
     delay(50);
     Serial.println("pB,128,22,100,0,1,45,1,0");                 // Load meter scale to 1 buffer
     
     delay(1000);

     Serial.println("at,1,0");                 // Load meter scale to 1 buffer
     
     delay(50);
     Serial.println("pB,128,22,100,0,1,55,1,0");                 // Load meter scale to 1 buffer
     
     delay(1000);

     Serial.println("at,1,0");                 // Load meter scale to 1 buffer
     
     delay(50);
     Serial.println("pB,128,22,100,0,1,65,1,0");                 // Load meter scale to 1 buffer
     
     delay(1000);

     Serial.println("at,1,0");                 // Load meter scale to 1 buffer
     
     delay(50);
     Serial.println("pB,128,22,100,0,1,75,1,0");                 // Load meter scale to 1 buffer
     
     delay(1000);

     Serial.println("at,1,0");                 // Load meter scale to 1 buffer
     
     delay(50);
     Serial.println("pB,128,22,100,0,1,85,1,0");                 // Load meter scale to 1 buffer
     
     delay(1000);

     Serial.println("at,1,0");                 // Load meter scale to 1 buffer
     
     delay(50);
     Serial.println("pB,128,22,100,0,1,95,1,0");                 // Load meter scale to 1 buffer
     
     delay(1000);

     Serial.println("at,1,0");                 // Load meter scale to 1 buffer
     
     delay(50);
     Serial.println("pB,128,22,100,0,1,105,1,0");                 // Load meter scale to 1 buffer
     
     delay(1000);

     Serial.println("at,1,0");                 // Load meter scale to 1 buffer
     
     delay(50);
     Serial.println("pB,128,22,100,0,1,115,1,0");                 // Load meter scale to 1 buffer
     
     delay(1000);

     Serial.println("at,1,0");                 // Load meter scale to 1 buffer
     
     delay(50);
     Serial.println("pB,128,22,100,0,1,125,1,0");                 // Load meter scale to 1 buffer
     
     delay(1000);

     Serial.println("at,1,0");                 // Load meter scale to 1 buffer
     
     delay(50);
     Serial.println("pB,128,22,100,0,1,135,1,0");                 // Load meter scale to 1 buffer
     
     delay(1000);

     Serial.println("at,1,0");                 // Load meter scale to 1 buffer
     
     delay(50);
     Serial.println("pB,128,22,100,0,1,145,1,0");                 // Load meter scale to 1 buffer
     
     delay(1000);

     /*================================================================*/
     Serial.println("ac,0,0");                      // clean buffer
     delay(50);
     Serial.println("fa,12,35,30,2,1,0,Thank you for watch!");  // Write text
     
     delay(50);
     Serial.println("Gb,20,236,62,2,1,0");          // Draw a line
     
     delay(150);
     Serial.println("fA,25,25,65,0,1,0,Alaonix");   // Write text 
     
     delay(1500);
     exit(0);
}